Aircraft Maintenance, Electrical Systems, and Hazard Communication in the Air Force Practice Test

These questions are part of the practice quiz. Start practicing

• The AIM-120 AMRAAM is primarily used as which type of missile?
• Which munition family primarily uses laser guidance?
• What is the Maintenance Information System for MDC used on the F-22?
• Which statement best describes the cardinal principle of loading munitions?
• The final message or report for a class C through E mishap MUST be submitted within _________.
• Which aircraft requires the guns to be in the fixed-forward firing position when boresighting?
• Who retains accountability for deployed SPRAM items?
• In maintenance status coding, XD2 indicates what?
• Which corrosion-prone area uses rubber O-rings and sealant compound to prevent moisture from entering and causing corrosion?
• Which publication is cited for Weapons Safety Investigations and Reports?
• What does the TCTO direct for an item or component that is red tagged?
• For most equipment, where are AFTO Form 244 and 245 located?
• The Phase inspection is a one-time or short duration inspection that occurs because of special circumstances.
• What is the maximum weight capacity of the B-4 stand?
• What do Bomb Racks use to force a store away from an aircraft?
• Which item records completion of HAZCOM training in the work area?
• Which guidance provides information on proper asset/material management?
• What is always the first step to troubleshooting and fault isolation after gathering information on the fault?
• Where would you find scheduled inspections on the AFTO Form 244?
• True or False: Operational Units can use LSEMS to manage F-35 support equipment inventory.
• The AIM-120 is also known as what?
• A nuclear weapon being armed without authorization would be a ______.
• In the SMS lineup, what does MS stand for?
• What program is accessed via ALIS?
• To which category are explosive ordnance disposal actions assigned?
• Which launcher is the Configurable Rail Launcher (CRL) used on F-22 aircraft?
• The LAU-118 launcher is used to carry which munition?
• Which of these is NOT a potential disqualifying factor for the Personnel Reliability Program (PRP)?
• Which trailer has a maximum lift height of 12 feet above ground level?
• Which guidance provides information on the nuclear munitions enterprise?
• Which flag is used to describe a nuclear safety deficiency?
• Tamper seals are connected to which components?
• What caliber is the GAU-21?
• What regulation provides information on the weapons safety program?
• Which type of bomb is used for aircrew and ground crew training?
• What can an equipment custodian accomplish using the Alternate Mission Equipment System (AMETS) program?
• What aircraft uses the LAU-118 rail launcher?
• PE stands for which type of inspection?
• During which process is an Aircraft Turnaround Supervisor required?
• The Paveway series of bombs primarily utilize which type of guidance?
• TO provides deficiency reporting information?
• What does MASO stand for?
• In a parallel circuit, what is applied simultaneously across all devices?
• Which of the following is NOT a data category in IMDS?
• The SUU-67 pylon is installed on which aircraft?
• AFTO Form 350 tag is used on DIFM returns to indicate what?
• Which unit must you coordinate munitions turn-in with?
• What is the Special Duty Identifier code for Weapons Safety Manager?
• Which bomb series is Insensitive Munitions (IM) with less sensitive explosive fillers?
• True or False: The Material Requisition List page can be accessed via the Maintenance drop-down menu in CMMS.
• Which of the following AFSCs is NOT listed as requiring 7-skill level qualification to apply for 8W000?
• Which Major Command would weapons personnel be assigned to if they are testing new weapon systems?
• In which MAJCOM would 2W1s primarily work on bomber aircraft?
• When does your organization retain accountability for an item?
• Which section is NOT a part of the Armament Flight?
• A nuclear weapon being armed without authorization would be a ___________.
• Which policy governs the use, return, and disposal of government materials?
• Which munition's rocket motor incorporates an internal Ignition Safety Device (ISD)?
• Which AGE accessory is used for loading JASSMs on shoulder stations of the ICSMS pylon?
• Which designation denotes the basic Stores Management System used on the F-16 and F-22?
• The automatic-computed release system relies on what to decide when to release?
• Which statement is NOT a potential PRP disqualifying factor?
• The GAU-2 is flown on which aircraft?
• Which type of missile launcher is most common?
• Bench stock levels are based on what factor?
• Which system uses wind corrections to improve the dispersion of cluster submunitions?
• The MASO may authorize munitions issue requests through which channels?
• What would indicate a short to ground or an overloaded circuit?
• The End of Runway (EOR) inspection is conducted immediately before which phase of flight?
• Which system provides total asset visibility and accountability for F-35 Support Equipment?
• What secures missiles on rail launchers to prevent unnecessary movement?
• Which Cluster Bomb Unit (CBU) uses the Wind Corrected Munitions Dispenser (WCMD)?
• Which system is described as air launched submunition dispenser systems?
• Which form is used with the DD Form 1577-2, as implied by the referenced procedure?
• What process ensures proper tracking and authorization of hazardous materials?
• A No-Lone Zone contains what components?
• Which aircraft uses the LAU-147 launcher?
• Which launcher carries only the AIM-9X as its munition?
• What is flown on the F-22 aircraft?
• Where must signs for a No-Lone Zone be posted?
• The purpose of a Status message is to _______.
• Which statement about the Phase inspection is true?
• Which aircraft carries the Cluster Bomb Rack?
• Which statement about converting AC power to DC power is correct?
• Which system provides total asset visibility and accountability of all F-35 Support Equipment?
• How often does the weapons safety office review the explosive location map and provide required changes or corrections to Civil Engineering (CE)?
• Which statement best describes the M61A1 gun system’s integration on aircraft?
• Which launcher can carry up to 8 conventional weapons with MAU-12 ejector racks installed?
• The purpose of a Status message is to __________.
• What prioritization category would you use to order a part if a work stoppage occurs?
• What are the individual data elements of a Production Asset Inspection Requirement?
• What is NOT normally used to switch contacts but is used to impart physical motion?
• MIL-STD-1760 cables are used to facilitate communication between the aircraft and what system?
• How are training records maintained?
• The W80 nuclear warhead is associated with which missile?
• Which is a duty title held by someone who has 3-skill level and 5-skill level Journeyman qualifications?
• Which pylon is installed on the F-35?
• What is NOT a hazard to be concerned with in an industrial area?
• What term describes a system where one push of the weapons release switch generates one release pulse?
• Which statement best describes the role of 2W1s?
• Which two designations are explicitly named as the Small Diameter Bombs (SDB)?
• What grid is used to move inventory within the Lightning II Support Equipment Management System (LSEMS)?
• Custody turn-ins are used for munitions on the munition's __________ account.
• Which change request priority does not fall into emergency or urgent categories?
• What does the LAU-142 pneudraulic launcher use to return it to the retracted position?
• Which of the following is a valid SPRAM ERRC code?
• What describes a failure that is not evident during bench checks but manifests during service?
• _______ is the measurement of the rate that the current is flowing.
• Which initiator electrically initiates FMU-139 tail fuzes?
• What categories are assigned to methods and procedures TOs (MPTOs)?
• How frequently must a wall-to-wall inventory be completed after the initial inventory in LSEMS?
• Anytime fueling is being done during a Concurrent Servicing Operation (CSO) a _________ is required.
• Which device is used for loading JASSMs on ICSMS pylon shoulder stations?
• What laser guided bomb uses either the MK-82 or BLU-111 bomb body?
• Copper and copper alloys are always primed and top coated due to its low resistance to corrosion.
• Which connector design uses a captive ring to mate with a receptacle?
• What type of contact is most commonly found in multi-pin connectors?
• What is electrical pressure from a power source such as a battery?
• Within TICMS, the term 'Load Asset' refers to a munition that is:
• What aircraft uses the LAU-142 rail launcher?
• Isochronal Inspection is defined as which of the following?
• Which program governs nuclear weapons safety and surety in the United States Air Force?
• What additional form is required when using DD Form 1577-2?
• What additional form is required when using a DD Form 1577-2?
• Which initiator powers the FMU-139D/B Bomb Fuze?
• How far away must lightning be for you to cease flight-line operations and seek shelter?
• Which type of bomb may contain a spotting charge for visual observation of accuracy?
• What must the commander make readily available to all personnel?
• What type of inspection occurs after the accrual of a certain number of flying hours?
• Which instrument is typically used to measure voltage in electrical circuits during maintenance?
• What type of hazard does a HD 1.2 munition pose?
• What are the minimum required fields on the AF Form 2430?
• MM-PAIRS stands for which phrase?
• The tail fuze of FMU-152A/B uses which initiators?
• What is the main purpose of the AFTO 781K form?
• What bomb rack is installed on the Multipurpose Rotary Launcher (MPRL) to carry conventional stores in B-1 bomb bays?
• When repairing braided shield wire, which method is appropriate for holes 50% or less of the harness diameter?
• Which SMS is used on the F-15?
• Which circular multi-contact connector contains ramped grooves and a spring-loaded device and 3 pins spaced 120 degrees apart that provides a positive lock?
• A common cause of short circuits is
• Which SMS is used on the B-1B?
• Which color condition tag designates a serviceable item?
• What provides guidance on corrosion control?
• What determines weapons release sequence if multiple stations are selected?
• Which of the following is the Digital Stores Management System used on the A-10?
• The M299 launcher on MQ-9 is designed to carry which missiles?
• What solenoid component returns the plunger to its original state?
• Which launcher is used on the F-15 and can carry AIM-9X, AIM-9L/M, and AIM-120?
• Which term describes the rate of current flow?
• What must F-22 users ensure matches with information in the Integrated Maintenance Data System (IMDS)?
• The Master Nuclear Certification List (MNCL) does not include procedures for Nuclear Certified Items (NCI) and Nuclear Certified Equipment (NCE).
• What caliber is the M61A1 and M61A2?
• The B-61 is a _______.
• What are the 7 Skill Level Craftsman enlisted grade requirements for Quality Assurance Inspector?
• In safety investigations, which report type is associated with final conclusions and recommendations?
• The AGM-114 is carried on the _______.
• The SGNSC compresses the nitrogen to as high as ______.
• For aircraft-specific inspection requirements, which document should you consult?
• When performing nuclear operations, what should you do if you notice a discrepancy, or if something does not look right?
• Which SMS is used on the A-10?
• A solenoid is normally used to switch contacts.
• How many different types of failures can electrostatic discharge cause in ESDs?
• The GAU-22 is used in which aircraft?
• Which ejector rack is installed on the BRU-57 smart rack assembly?
• What is the only gas-operated launcher?
• AIM-120 missiles use what for target acquisition?
• Which routing guideline ensures proper positioning of wire bundles in relation to ribs?
• Which instruction covers environmental compliance and pollution prevention?
• The Personnel Reliability Program (PRP) includes how many position categories?
• What option brings up checkout user in Support Equipment Status in CMMS?
• How many types of sealing methods are authorized for the Tamper Control and Detection Program?
• Which tag indicates an unserviceable, condemned condition of an item?
• True or False: The Production Asset Inspection Requirement (PAIR) definition provides parameters to track against actual usage results.
• Which publication provides guidance on weapons safety investigations and reports?
• What is the requirement to attain the title 9-skill level Superintendent?
• What is a drawing that shows electrical connections and components of a circuit arrangement?
• Which Air Force instruction provides guidance for proper handling of hazardous material?
• What regulation helps you understand the role of Logistics Readiness Squadron (LRS) in handling materials?
• What priority of change request identifies a deficiency that could jeopardize mission safety?
• Which pylon is used on B-52 aircraft for conventional stores management?
• Which option correctly pairs a DIFM policy topic with its identifier?
• What provides real-time visibility of qualifications and training status?
• In TICMS, which page displays potential munitions violations?
• Which document designation corresponds to the Mishap Prevention Program referenced in Air Force instructions?
• What characteristics cause corrosion and deterioration in high velocity gases, abraded spent shell casings, and solid particles?
• Which lead completes the circuit from the power source through the aircraft structure?
• Which GP bombs are 500 pounds?
• BRU-56 ejector rack is installed on which launcher?
• Which system determines the weapons release sequence if multiple stations are selected?
• What regulation provides information for filling out AF Form 2005?
• ALIS is a stand-alone database for F-35 aircraft.
• Which mounting option is described for air-to-ground missiles?
• Which combination is used to restrict access to munitions areas?
• What munition is loaded on the LAU-118 launcher?
• Which chapter in the Mishap Prevention Program covers the weapons safety program?
• Which statement accurately describes the AME Tracking System's purpose?
• Which system in ALIS updates the electronic equipment log?
• Which system serves as the primary debriefing tool for flight schedules and discrepancies for the F-35?
• What grid is used to move inventory within LSEMS?
• What is low observable (LO) material designed to be?
• To request access to the Theater Integrated Combat Munitions System (TICMS), what document must be submitted?
• Which publication provides ILS-S Material Management Operations guidance?
• What is the first page seen when logging into CMMS?
• Which form is a continuation of AFTO Form 244 Part V?
• What provides a comprehensive list of training courses for the 2W1 career field?
• Which jettison mode can receive circuit power from the aircraft's battery bus if needed?
• What program lists all hazardous chemicals present in your work area?
• What TO element highlights an essential procedure?
• The Unit Committed Munitions List (UCML) is a mandatory use document for all operational units.
• The GBU-54 is identical to which bomb except for an added DSU-38 laser sensor?
• DSMS stands for which of the following?
• In accordance with WSSR, supervisors must ensure personnel are aware of changes to the __________.
• Where should No-Lone Zone signs be posted to ensure proper entry control?
• Which is one of the four main boresight conditions requiring boresight?
• During Concurrent Servicing Operations, who must supervise the fueling process?
• Who is responsible for the protection of all government property?
• The statement 'The wires in a protective harness have a thicker insulation wall and no protective jacket' is true or false.
• Which color condition tag indicates an unserviceable condemned item?
• What must be read out loud to all technicians performing nuclear operations?
• Tamper seals are connected to certain __________.
• Which system stores rounds in a serpentine track inside a large outer container?
• In accordance with WSSR, individuals have the responsibility to report nuclear safety hazards and deficiencies to supervisors and the ______.
• To identify a nuclear fault_______ .
• Which launcher requires an umbilical connector, ground strap, and a rocket motor connection to activate and deploy the AGM-65?
• Which codes are considered due in from maintenance (DIFM) assets?
• MPTOs are assigned categories in which range?
• Who is authorized to sign for custody issue items?
• A DULL SWORD report should be generated when Nuclear Certified Equipment is damaged, excluding minor issues like dents, corrosion, or flat tires.
• In a relay, which component can allow or interrupt current from flowing?
• The GAU-23 is flown on which aircraft?
• Which statement about electrically primed munitions and electrostatic discharge is correct?
• What is used for mechanically switching electrical circuits on or off?
• What supports the cradle assembly of the MHU-83 lift truck?
• Which component on the M61A2 gun is set to the clearing position and pushes back on the clearing sector, allowing the breech bolts to enter the clearing path?
• Which Stores Management System is used on the MQ-9?
• The ignition of the AGM-65 rocket motor is initiated by which component?
• During connector visual inspection, which property must be undamaged to maintain insulation?
• What document accompanies hazardous materials and provides hazard information, handling, and safety precautions?
• Which description best matches the function of Detents and Dampers in missile rails?
• Which item is described as using rubber O-rings and sealant to prevent moisture entry and corrosion?
• Which aircraft flies the Conventional Bomb Module and how many conventional munitions can it carry?
• To which TO would you refer for guidance on the Air Force Technical Order System?
• Which document provides corrosion control guidance in aerospace maintenance?
• Which aircraft uses the LAU-151 rail launcher?
• In TICMS, what classification is given to a munition that is not in a container?
• What is a process by which mission capable aircraft are generated in a minimum amount of time?
• Which Stores Management System is used on the B-2 bomber?
• Which gun system has 2 separate systems to allow the operator the ability to select the feeds on the gun feeder assembly?
• Which SMS is used on the F-16 and F-22?
• Which inspection translates flying hour utilization rates into calendar periods?
• Who MUST you coordinate munitions turn-in with?
• What incorporates all other files and is a new edition of the publication?
• Which personnel group bears responsibility for government property protection?
• What is excluded from most aircraft armament circuits test sets?
• IMIS stands for?
• What type of harness has wires with thinner insulation?
• How frequently are physical inventories of munitions required?
• Which document contains the Explosive Safety Standards guidance?
• What is the firing rate range of the GAU-2 7.62mm gatling gun?
• On a schematic diagram, how are electrical connections and components depicted?
• Which system can Operational Units use to manage F-35 support equipment inventory?
• Which Technical Order would you find information on the handling of explosively loaded aircraft?
• Which fabric type is specified for clothing when working with electrical circuits?
• What corrosion-prone area is associated with corrosive agents entering and becoming entrapped between the layers of metal?
• What is true regarding the suspension of the BRU-57 from the aircraft?
• Which document mandates annual review of safety rules for each weapon system?
• What is the preferred method for submitting an issue request for munitions?
• Which document contains the Mishap Prevention Program guidelines?
• Which term describes the connector style that uses bayonet coupling for a positive lock?
• True or False: Electrically primed munitions are not sensitive to electrostatic discharge.
• DoDM 5210.42_AFMAN 13-501 divide the PRP into which two categories?
• On which aircraft is the GAU-23 cannon flown?
• Which regulation governs the material management policy referenced for LRS?
• GAU-22/A gun system power specification states it is powered how?
• The current range most associated with incapacitating neural response in electrical exposure is which option?
• What does an aircraft's -1 Flight Manual list?
• The M61A1 is a gun type that fires at what caliber?
• What must be undamaged during a visual inspection on the connector?
• Which component is associated with the M61A2?
• What deficiency type includes the initial failure of the item after installation?
• Which GAU is used on the F-35?
• True or False: TCMAX is the current tool accountability program used by all airframes.
• What should you send someone to get if they come up while you are performing first aid for an electrical shock victim?
• Which document provides appropriate timeline information for report submissions and guidance on formatting?
• Which aircraft flies the 1760 Enhanced Conventional Bomb Module and how many GBU-38's can it carry?
• What aircraft uses the LAU-129 rail launcher?
• Which aircraft carries the Conventional Bomb Module?
• What aircraft carries the Cluster Bomb Rack?
• Which SMS is used on the B-52?
• Which bomb type has an explosive weight of approximately 50 percent of its total weight?
• PACS stands for which in the SMS lineup?
• What does ICSMS stand for in the context of B-52 pylons?
• Which option correctly identifies the primary technical advisory agency for maintenance?
• Which connector type uses a coupling ring that slides along the axis?
• Which aircraft uses the SUU-95 pylon?
• Which element performs off-equipment modifications on guns?
• Which aircraft are equipped with the M61A1 20 MM gun system?
• When an AIM-9 is jettisoned from an F-15, what else is jettisoned?
• Which defect type is assigned to inoperable systems suspected of non-conformance?
• Dummy rounds used for testing gun systems are turned in using which method?
• Which dropdown menu item provides information on the Net Explosive Weight (NEW) for each division of munitions?
• What document gives you unescorted access to a controlled area?
• Which statement about ALIS is accurate?
• In a Personnel Reliability Program (PRP) position, which option best describes the required actions to retain status?
• What type of defect indicates mission limiting discrepancies?
• Which area is most closely associated with corrosion that occurs when different metals are in contact within fastener regions?
• IMDS is the primary management information system of the Air Force.
• Which ammunition handling system stores rounds in a serpentine trackway inside a large outer container?
• What munition is loaded on the LAU-147 launcher?
• What flag word is used for an event that could create the risk of war, such as an unauthorized launch of a nuclear-capable missile?
• What can electrical current passing through the body do?
• Which gun system must be charged twice to ensure the firing chamber is clear?
• When can you wear rings, watches, or jewelry while working in any form of industrial area?
• Before declaring a nuclear fault as non-critical, personnel must identify faults ________?
• LAU-118 is used to carry which munition?
• What munition is loaded on the LAU-129 launcher?
• What do To's incorporate?
• The AGM-86B is a type of which missile category?
• Which action is performed first when safing the GAU-8?
• Which of the following is a Nuclear Surety report which is a mishap not included in the accident category?
• What munition is loaded on the LAU-151 launcher?
• Which system is associated with asset custody management and transfers?
• The GBU-39 and GBU-53 are also known as
• What are the 7 Skill Level Craftsman enlisted grade requirements for Weapons Section Chief?
• Who designates a Restricted Area Badge (RAB) issuance official?
• Which pneumatically operated launcher generates air pressure to eject the missile on the F-35?
• General Purpose bombs are characterized by their explosive weight being approximately what fraction of the total weight?
• What process must be followed when acquiring hazardous materials?
• IMDS is a stand-alone database for F-22 aircraft.
• What does MM-PAIRS stand for?
• Which GP bombs are 2000 pounds?
• ALIS is associated with which aircraft?
• How can a short in a circuit be identified?
• Which page allows you to reconfigure all available stations for the selected aircraft?
• Which regulatory directive requires strict adherence to FOD prevention measures?
• Deficiencies for the Master Nuclear Certified Listing (MNCL) and items on the list are reported according to ___________.
• Which skill level qualification is required prior to applying for the 8W000 Weapons Safety Manager Special Duty Identifier?
• Disassembly of munitions is considered which?
• Where are air-to-ground missiles installed?
• On AFTO 781A, which mark indicates the condition of the equipment is unknown?
• What are the 7 Skill Level Craftsman enlisted grade requirements for Weapons Load Crew Chief?
• What aircraft is the GAU-18 installed on?
• Which form is used to track scheduled maintenance and jobs completed?
• What is the most common type of missile launcher?
• Which priority TCTO is distributed within 5 days of receipt?
• The SGNSC nitrogen compressor can reach up to which pressure?
• The Hazardous Waste Management Plan (HWMP) must be approved by whom to ensure compliance?
• Which statement is not a data element of a Production Asset Inspection Requirement?
• What is the firing rate of the 30MM GAU-8 gatling gun?
• Nuclear Certified Equipment (NCE) monitors must be trained in accordance with which instruction?
• Which statement best describes the primary difference between BLU-series and MK-series General Purpose bombs?
• Which Stores Management System is used on the MQ-9?
• Which document would you consult for material management procedures?
• Which code is used to indicate a due-in from maintenance asset?
• What aircraft uses the LAU-141 rail launcher?
• Which munition is loaded on the LAU-142 launcher?
• Which DoD publication administers the Nuclear Weapons Personnel Reliability Program (PRP) guidance?
• What priority of change request could cause personnel injury or damage to equipment?
• Which system is used to manage maintenance data electronically for the F-35?
• Which regulation is referenced for familiarizing proper procedures for signing for equipment?
• On which aircraft is the GAU-21 installed?
• When declaring a nuclear fault as non-critical, the faults must be identified in what manner?
• Which system provides real-time information to the Integrated Product Team (IPT)?
• Which mechanism is used to eject stores from a bomb rack?
• Training records are maintained electronically via an MIS approved by which branch?
• The MJ-1 bomb lift truck can lift stores up to how many pounds?
• XD2 and XF3 codes are used to indicate assets that are what in DIFM context?
• How many different position categories are there for the Personnel Reliability Program (PRP)?
• Electrical safety guidance in DAFMAN 91-203 is located in which chapter?
• Which variant of the AGM-158 is the JASSM-ER?
• What deficiency is an unacceptable condition impacting operational safety?
• The Supply Chain Management program is accessed through which system?
• Which ammo handling system component stores and moves ammunition longitudinally in the ammunition drum?
• Which launcher is used to carry AIM-9L/M missiles?
• What is the cardinal principle of loading munitions?
• What online program allows accumulation point managers to schedule turn-in and disposal?
• What type of action TCTOs are distributed to all affected personnel within 4 hours?
• Which component provides elevation and azimuth movement for the 105mm howitzer?
• How is the completion of work area-specific HAZCOM training documented?
• Which TO file type adds information to the original TO without replacing existing pages?
• Which document determines the contents of your shop bench stock?
• What is the immediate action required when a nuclear system fault occurs on a loaded nuclear combat aircraft?
• LAU-117 activation requires which connections to deploy AGM-65?
• If you notice any unusual behavior, what should you do?
• What is the most common type of resistor used in electronics?
• According to DAFI 23-101, what should be done with serviceable items that are no longer needed?
• The BRU-44 bomb rack is used on the rotary launcher of which aircraft?
• In this context, which deficiency category corresponds to unacceptable safety-related conditions?
• Which GP bombs are 1000 pounds?
• Which areas are vulnerabilities for Operations Security (OPSEC)?
• No-Lone Zones contain __________, nuclear weapon systems, or critical components.
• Which GP bombs are 2000 pounds?
• The statement 'The wires in an Open harness have a thicker insulation wall and no protective jacket' is true or false.
• Who oversees all aspects of daily accountability and management of the conventional and/or nuclear weapons stockpile?
• When a DIFM item is ordered, which action should be taken?
• How is the GAU-22/A gun system powered?
• Which multimeter switch position would you select to perform a continuity check?
• Which type of bomb has an explosive weight of approximately 50% of the total weight?
• Who is responsible for AFTO Form 95 on equipment?
• What accompanies all hazardous materials on the hazardous chemical list?
• Which aircraft hosts the GAU-21?
• Where should hazardous waste be disposed of at your work station?
• Which ERRC code identifies Special Purpose Recoverable Authorized Maintenance items?
• Which TO file type is a new edition of the TO that supersedes the previous edition?
• What term highlights an essential procedure that could result in injury or death?
• What does the LAU-147 use to prevent inadvertent firing while the missile is loaded?
• What provides air power to safeguard a free and open Indo-Pacific region?
• Which munitions component is described as a 'Carriage' used to attach loads to aircraft?
• Which lift truck allows for remote operation of the table and lift boom azimuth via an RCU?
• Which organization serves as the primary repair center for depot-level maintenance?
• Which four functions are accessed by IMDS?
• OPSEC stands for what?
• Which document provides a roadmap for all training required for career progression in the Aircraft Armament Systems specialty?
• What type of connector mates with a wire or cable?
• What is the lift capacity of the Split Deck maintenance platform?
• Which gun utilizes the clearing sector holdback tool?
• Which document lists all the PPE requirements for chemicals used on the job?
• An Aircraft Turnaround Supervisor is required during ________.
• The FMU-152A/B tail fuze is powered by which initiator?
• Which flare magazine holds 15 flare payloads?
• Which TO file type adds to the original TO without replacing the existing pages?
• What will clear itself after each burst through the delay circuitry provided by the electronic control unit (ECU)?
• A ______ report is used to report nuclear safety or nuclear surety deficiencies not falling into the accident or incident categories.
• What is the purpose of the phase inspection concept?
• What caliber is the GAU-18?
• Which training requirement is specific to hazardous waste for personnel?
• When repairing braided shielding, how much should you overlap heat shrink tubing?
• Which regulation can help familiarize you with the proper procedures for signing for equipment?
• Which gun is installed on the HH-60 aircraft and can be reloaded midair?
• Which equipment is associated with a maximum lift height of 12 feet above ground level?
• Who is the primary technical advisory agency for maintenance?
• Which document stands for Unit Committed Munitions List?
• What must you request from your security manager to apply for a RAB?
• Special Purpose Recoverable Authorized Maintenance items are listed in which Technical Order series?
• What aircraft uses the LAU-128 rail launcher?
• Which magazine or dispenser can launch either LUU-2 or LUU-19 parachute flares?
• What security device is required for weapons stored outside an approved structure?
• In the 105mm howitzer system, what does the abbreviation TGM stand for?
• Which group identifies the category?
• The FMU-139D/B Bomb Fuze is powered by which initiator?
• Which component physically moves to operate a mechanically operated device?
• What is the relay or solenoid component that physically moves a mechanically operated device?
• The LHMA mounting plate mates with which lift truck model?
• When repairing braided shield wire, what should you use if the hole in the braiding is 50% or less of the wiring harness diameter?
• IMIS is an acronym used in maintenance information systems. What does IMIS stand for?
• Which SMS is used on the F-35?
• What is the comprehensive education and training document for the Aircraft Armament Systems Specialty?
• For the LAU-128, which statement is correct about its loadout?
• Self-test procedures for a voltage detector are provided in which tech data?
• Which form must be completed to apply for a Restricted Area Badge (RAB)?
• AIM-9 Missiles track their target using ______.
• On which aircraft can no AIM-9 or AIM-120 missiles be jettisoned?
• DAFI 91-202 Mishap Prevention Program chapter that covers the weapons safety program?
• What system does the M61A1 gun system use on the F-15E?
• Which pairing is NOT correct?
• Cluster Bomb Units (CBU) are which type of systems?
• Which of the following is one of the three elements that a 2W1 air force specialty may be assigned to?
• Which regulation provides complete guidance on the Air Force Occupational Safety and Health program?
• The DSU-38 laser sensor is added to which bomb, making it distinct from GBU-38?
• What is required to be awarded the 5-skill level, Journeyman?
• Which form governs authorization for personnel who may accept training munitions?
• Which GP bombs are 500 pounds?
• Which color tag indicates a serviceable item?
• What is the general purpose of pylons on an aircraft?
• The safing process is identical for which pair of gun systems?
• What aircraft is the Smart Bomb Rack Assembly carried on?
• Which air conditioning unit is paired with the APU for climate control in the system?
• In troubleshooting, which phase requires the technician to gather information and review system fault codes for analysis?
• Which 500lb bomb is a laser and GPS guided bomb?
• Which regulation states the requirements and responsibilities for personnel who have access to nuclear weapons and systems?
• What type of clothing should be worn when working with electrical circuits?
• IPT stands for?
• Which pylon is used exclusively for nuclear stores on B-52 aircraft?
• AME stands for which term?
• Which item is used to electrically safe the LAU-106 launcher?
• What are the 7 Skill Level Craftsman enlisted grade requirements for Armament Maintenance Floor Supervisor?
• Where are air-to-ground missiles typically mounted?
• How do we identify the value of resistance on a fixed resistor?
• Which regulation covers the use, return, and disposal of government materials?
• Which training must all personnel whose work involves hazardous waste complete?
• Which computer coordinates the LAU-118's communication with the F-16?
• The GAU-23 cannon is flown on which aircraft?
• What should you use to secure new or repaired wire to the harness?
• What are parts ordered in ALIS via the SCM application ordered against?
• What fire division is posted when the hazard is a mass explosion?
• What is a sign of electrical shock?
• In which publication would you find information about the No-Lone Zone and its requirements?
• Which component is constructed of interlocking segments?
• What notable loss occurs when transmitting Direct Current over long distances?
• The Theater Integrated Combat Munitions System (TICMS) is used for which purpose?
• Which statement is true about the MJ-1 bomb lift truck’s lifting capacity?
• In a relay, which component opens and closes the switching contacts?
• What is the relay or solenoid component that can allow or interrupt current from flowing?
• True or False: According to DAFI 21-101, historical data will only be tracked using AFTO Form 95.
• Where can you find the AFTO Form 244 and 245 for most equipment?
• The FMU-139 series tail fuzes are electrically initiated by what initiator?
• What type of bomb release allows the aircraft to release weapons once predetermined parameters have been met?
• Which authority has the ability to modify inspection time constraints for local operating conditions?
• Which aircraft hosts the 1760 Enhanced Conventional Bomb Module?
• What is used to ensure only authorized personnel are in the area when munitions are on the flight-line?
• What does the LAU-118 use to communicate with the F-16?
• What is done before the first flight of the day?
• What is the AF Form 2430, Specialist Dispatch Control Log used for?
• ALIS stands for Autonomic Logistic Information System.
• Which solenoid component physically moves a mechanically operated device?
• Most aircraft will have one extinguisher per every ______ feet.
• Which group identifies primarily the type of TO?
• Which guidance provides the criteria on flag words for reporting?
• Which pylon is associated with the B-52?
• Who is the accountable property officer for the execution and enforcement of proper munitions accountability?
• What circular multi-contact connector employs a coupling ring that slides along the axis of the connector?
• The _____ can be used to operate greasing equipment.
• What is the most common safety item for an entire aircraft weapons system?
• Which tag indicates an essential procedure that could damage equipment?
• TO file type issued when only a portion of the existing TO requires updating.
• Which of the following is a Load Container?
• DAFI 91-202 is associated with which program?
• Which circular multi-contact connector requires a 90-degree clockwise twist to couple?
• Which aircraft do NOT require boresight?
• Normally, maintenance is _______ when an aircraft is in an explosively loaded configuration.
• What does IMIS stand for in maintenance information systems?
• What type of failure does a damaged Electrostatic Sensitive Device (ESD) have if it passed a bench check but failed under stress?
• The GAU-18 is installed on which aircraft?
• The BRU-71 pylon is installed on which aircraft?
• Which SMS contains an active sensor for RADAR operation?
• In the Lightning II Support Equipment Management System (LSEMS), which grid is used to move inventory?
• Which type of bomb is used for training and may include a spotting charge?
• Which resistor type is designed to maintain a fixed resistance value?
• A class A and B mishap requires preliminary messages to be sent within _______ of the on duty mishap.
• LAU-147 is associated with which aircraft in the context of missile ejection?
• What happens when the weapons release is pressed in the automatic release option?
• Which form lists personnel authorized to sign for custody issue items?
• What is required to reach the 5-skill Journeyman level besides basic eligibility?
• The JASSM-ER is the extended-range variant of which missile family?
• If a discrepancy is found during nuclear operations, who should be told immediately?
• What fixed bay bombing system can carry up to 9 B-11 shackles?
• Which types of munitions are listed on the Unit Committed Munitions List (UCML)?
• AFTO Form 245 is the continuation of AFTO Form 244 Part V. Which form does AFTO Form 245 continue?
• What munition is loaded on the LAU-105 launcher?
• In ALIS, the parts order references which identifier?
• How many volts does it take for the human body to feel a static discharge?
• Which regulation covers the use, returns, and disposal of government materials?
• TO 00-35D-54 covers which subject?
• The AGM-158 is also known as the ______.
• What is the acronym for the program that governs personnel reliability for nuclear weapons?
• DESR 6055.09_AFMAN 91-201 is categorized as which type of safety standards?
• For a class _________ mishap the final message or report should be completed within ________.
• What happens when resistance is increased in a circuit?
• What drives the proper disposal of hazards and environmental protection?
• In fault isolation, what is the initial action after gathering fault information?
• Disassembly of munitions is _____?
• HMMP stands for what?
• Which corrosion-prone area collects natural sumps or collection points of water, hydraulic fluid, dirt, loose fasteners, drill shavings, and other debris?
• What TO provides guidance on the Air Force Life Cycle Management?
• True or False: AFTO Form 95 is the only means to track historical data under DAFI 21-101.
• The A/M32A-60 turbine transfers pneumatic bleed air to the aircraft or support equipment via which component?
• CFETP stands for what?
• What device is used to deliver an electric shock to restore a normal heart rhythm in a medical emergency?
• What does MASO stand for?
• Which air conditioning unit is commonly used in conjunction with the A/M32A-60 APU?
• Rounds of ammunition are categorized as _______ item in the Theater Integrated Combat Munitions System (TICMS).
• What type of resistors are used to select and adjust the amount of total resistance applied to a circuit?
• What do the DoD and Air Force mandate for all government material?
• No-Lone Zones restrict access to which category of items?
• Which guidance provides an overview on nuclear operations?
• What method is used to verify that the 105mm howitzer is clear?
• What does a red diagonal on AFTO 781A indicate?
• Which ammo handling system stores rounds in a serpentine trackway inside a large outer container?
• Crimp contacts can be inserted from the front or rear of the connector.
• Which tag indicates an unserviceable, condemned condition of an item?
• When diagnosing equipment issues, the initial step is usually what?
• Which of the following statements is true about AF Form 2430?
• Who is responsible for maintaining AFTO Form 95 or its equivalent on equipment?
• For diagnosing electrical faults in aircraft systems, which instrument is routinely used?
• The LHMA has a mounting plate that mates with what lift truck?
• Which chapter in DAFMAN 91-203 provides guidance on electrical safety?
• Which type of bomb has an explosive weight of approximately 50 percent of the total weight?
• Which adapter designation mounts rail launchers on F-15C/D/E pylons?
• Which item is NOT defined as Nuclear Certified Equipment (NCE)?
• Which term describes the electrical potential difference from a source such as a battery?
• In AFTO 781A, which marking indicates a non-urgent discrepancy?
• What is required for all personnel assigned to the flight-line?
• Which online system is used to manage environmental and occupational safety information, including scheduling of turn-in and disposal activities?
• What Management Information System (MIS) does the F-22 aircraft utilize for data collection?
• Which form is the hazard report form used in Air Force operations?
• Which aircraft is the BRU-71 pylon commonly used on for external stores?
• Which routing method would most likely cause chafing?
• Which term is described as incorporating all other files and representing a new edition of the publication?
• Who works with the maintenance training section to create a local foreign object damage (FOD) prevention training program?
• What requires a 90 degree clockwise twist to couple?
• Which items are considered critical information that should not be shared with unauthorized personnel?
• What type of safety does the GAU-22 have in the aircraft crew station?
• Which ranks can hold the Weapons Safety Manager position?
• What must work centers do when a DIFM item is ordered?
• How many Joint Direct Attack Munitions (JDAMs) can the BRU-57 carry?
• Which guidance for the weapons safety program incorporates maximum nuclear surety consistent with operations?
• AFH 23-123V2 is in-depth information for filling out which form?
• The BRU-71 pylon is installed on which aircraft?
• Which statement about mishap reporting timelines is true?
• A short circuit can often occur because of:
• What may be needed to troubleshoot nuclear capable aircraft?
• What system does the Integrated Maintenance Information System communicate with?
• In schematic diagrams, which feature represents electrical connections and components?
• Electrical current passing through the body can stop the heart and cause death within 4 - 6 minutes.
• Which document lists Primary Munitions (PM), Support Munitions (SM), Limited-use Munitions (LM), and qualification munitions necessary to meet unit operational, test, and training requirements?
• What is the final visual inspection conducted immediately before takeoff called?
• What is the minimum voltage that can cause damage to an electrostatic sensitive device (ESD)?
• What caliber is the GAU-22?
• When diagnosing a nuclear fault, which data should be used?
• What are the 7 Skill Level Craftsman enlisted grade requirements for Armament Maintenance Floor Supervisor?
• The report used to categorize certain nuclear safety deficiencies that do not fit accident or incident is named what?
• What corrosion-prone area is a prime spot for corrosion because of dissimilar metal contact between the steel pins and the aluminum hinge tangs?
• Low observable (LO) material is designed to be which of the following?
• Which missile release system automatically passes over stations not selected in the firing sequence?
• CRL is the acronym for which launcher type?
• LOHAS stands for which system?
• When is a new AF Form 2430 maintained?
• What caliber is the GAU-2?
• GAU-18 is installed on which aircraft?
• Who approves the HWMP to ensure compliance?
• The BRU-56 bomb rack is installed on the Multipurpose Rotary Launcher (MPRL) in the bomb bays of which aircraft?
• Which directive governs bench stock contents?
• What launcher is flown on MQ-9 aircraft and is designed to carry AGM-114 missiles?
• The LAU-142 rail launcher is used by which aircraft?
• Which inspection is due upon accrual of a certain number of flight hours or the expiration of a calendar period?
• In nuclear operations, which items must be read aloud?
• Which pylon is installed on the F-15E?
• Which form is used to order items from base supply?
• What inspection is performed between flight inspections of aircraft components?
• How should wire bundles be routed relative to the aircraft rib structure?
• What continually changes in amplitude and reverses direction?
• What begins the troubleshooting process?
• What MUST be done before performing any aircraft fuel cell maintenance?
• Which guidance provides information on personal duties and responsibilities concerning Weapons Systems Safety Rules (WSSR)?
• Which device is commonly used to open or close circuits remotely by energizing a coil?
• What ejector rack is installed on the multi-purpose rotary launcher (MPRL)?
• What TO file type is issued when only part of an existing TO needs an update?
• Which statement accurately describes what the Alternate Mission Equipment Tracking System monitors?
• Where would you look for demilitarization requirements?
• Which corrosion-prone area needs special attention given to the edges, areas around fasteners, and to cracked, chipped, and missing paint?
• Which document provides hazard information and handling instructions for hazardous materials?
• Which term describes the rate of current flow in an electrical circuit?
• Which of the following require mandatory PRP decertification and disqualification?
• What system utilizes electronic forms capabilities for the F-35 aircraft?
• Which bomb rack is used on the B-2 rotary launcher assembly?
• When testing live circuits, where should you keep one hand?
• A nuclear weapon being armed without authorization would be referred to as what term?
• Which of the following is required in addition to rank to attain the 9-skill level Superintendent?
• What is the relay or solenoid component that opens and closes the switching contacts?
• What does the Alternate Mission Equipment Tracking System monitor?
• Which launcher loads the AIM-120 missile?
• Which section of the LSEMS provides an overview of the percentage of allowance fulfilled?
• Which term describes a diagram that shows electrical connections and components of a circuit arrangement?
• How much current can paralyze the muscles and nerves through which it flows?
• What completes the circuit from the power source's positive terminal through the structure?
• Unusual behavior should be reported in accordance with what?
• What should slack between support points NOT exceed?
• A BLU-111 is what pound class of bomb?
• The BLU-111 is in which bomb weight class?
• What type of hazard does a HD 1.3 munition pose?
• What munition is loaded on the LAU-128 launcher?
• Which statement is true about the B-61 as noted in the material?
• Which statement correctly describes a short circuit?
• Which type of resistor is used in circuits where power requirements exceed 2 watts?
• In accordance with _____, specific safety rules for each individual nuclear weapon system will be reviewed annually.
• In a relay, which component physically moves to operate a mechanically operated device?
• What guidance explains the proper way to dispose of hazardous waste?
• Which term identifies a change request that could jeopardize mission safety?
• What are the 7 Skill Level Craftsman enlisted grade requirements for Weapons Expediter?
• AFDP 3-72 is the Air Force doctrine publication for which topic?
• The pneumatic bleed air from the A/M32A-60 turbine is delivered through which accessory?
• Which type of issue request authorizes only personnel listed on AF Form 68, Munitions Authorization Record to accept receipt of training munitions?
• What mode routes circuit power to the selected station for release once the appropriate switch is depressed?
• Damage to low observable material is documented in which system?
• The ADU-537 MMLA cradle assembly is used to load which type of munitions?
• The No-Lone Zone includes which components?
• Who can change the inspection time constraints for local operating conditions?
• Which TO provides inspection intervals for the A-10 aircraft?
• Static electricity discharges become perceptible to a person at approximately how many volts?
• Which publication's title includes 'Air Force Nuclear Weapons Surety Program'?
• Which connector type is described as having a coupling ring that slides along the axis to mate or unmate?
• What must you do first when safing the GAU-8?
• Which publication governs hazard communication and handling of hazardous material in the Air Force?
• What provides back shop support for on & off equipment maintenance tasks?
• Which type of power cannot be transmitted over long distances without considerable loss?
• Which document provides demilitarization procedures?
• Which statement correctly matches a gun system to its aircraft?
• Which TO file type is a new edition of the TO that supersedes the previous edition?
• In the Theater Integrated Combat Munitions System (TICMS), a munition that is NOT in a ________ is a Load Asset.
• Which resistor type is generally used for circuits involving higher power dissipation?
• Which corrosion-prone area is most affected by exposure to high-velocity exhaust gases and abrasive particulate matter?
• For the 2W1 career field, which element is one of the three elements to which a member may be assigned?
• What aircraft uses the LAU-106 launcher?
• In the loading process for JASSMs on the ICSMS pylon, which accessory is used to interface with the shoulder stations?
• Which message or report contains investigator analysis, rationale, conclusions, and recommendations to prevent reoccurrence?
• Which publication addresses environmental compliance and pollution prevention in Air Force operations?
• The SUU-73 pylon is installed on which aircraft?
• Loss, theft, or seizure of a nuclear weapon would be classified as which type of incident?
• Which factor commonly leads to a short circuit?
• Which TO provides guidance on the Handling and Maintenance of Explosives-Loaded Aircraft?
• What is the total weight capacity of the extension lift arms for the MJ-1 lift truck?
• The MJU-12/A flare magazine holds how many flare payloads?
• Which statement about Open harness wires is true?
• What should you do to release the retaining clip in a front release contact?
• What is used to electrically safe the LAU-106 launcher?
• Which component starts the explosive chain to detonate a bomb?
• Who reviews the explosive location map and provides any needed changes or corrections to Civil Engineering (CE)?
• Which type of resistors are designed to provide a constant, steady resistance value?
• What ensures that all contacts align properly during a visual inspection on the connector?
• Which deficiency is detected on new government-owned products that do not fulfill their purpose?
• Who determines if a Weapons Systems Safety Rules (WSSR) fault is critical?
• What type of connector employs a captive, internally threaded coupling ring that mates with the receptacle?
• The Aircraft Armament Flight is responsible for which type of gun modifications?
• Which CMMS page provides situational awareness of an aircraft's weapons configuration?
• What are 3 status codes for a Due In From Maintenance (DIFM) item?
• Which of the following is a minimum required field on AF Form 2430?
• Which statement does NOT apply to a multi-barrel type weapon?
• Which document would you consult to identify the PPE requirements for chemical handling?
• What munition is loaded on the LAU-106 launcher?
• In ALIS, which option should you select to access a production asset inspection requirement?
• Which munitions are loaded on the LAU-141 launcher?
• Which resource shows the percentage of allowance fulfilled in the LSEMS?
• Which caliber is used by M61A1 and M61A2?
• ALIS provides access to which logistics program?
• What priority category is used when ordering a part for a work stoppage?
• Who is responsible for coordinating local FOD prevention training program in conjunction with the maintenance training section?
• Which policy is cited as helpful for familiarizing proper procedures for signing for equipment?
• The criteria on flag words for reporting are found in which publication?
• What type of munitions issue request is used for unforeseen issues that may prevent a unit from performing its mission?
• What should all due in from maintenance (DIFM) items being returned be in?
• What provides detailed procedures in step-by-step form to accomplish a specific maintenance task?
• Which adapter is used to mount the LAU-128 rail launcher to the sides of pylons on the F-15C/D/E?
• Is the GAU-8 gun system hydraulically driven and mechanically connected to the feed system through drive shafts?
• Which diagnostic tool is commonly used for troubleshooting aircraft electrical issues?